74
APROTECH GmbH
Rathsbergstrasse 17
90411 Nuremberg / Germany
Trade register:
Nuremberg HRB 23727
USt.-Id-No.: DE 256 058 089
D-U-N-S: 31-260-0530
phone: +49 911 / 65 00 79-50
fax:
+49 911 / 65 00 79-79
eMail: [email protected]
Web: www.aprotech.de
Managing Director:
Peter Jung
Industrial Panel- and Box-PCs
4.4 SATA Configuration for MezIO
™
Module
The SATA configuration setting should be configured according to the MezIO™ card installed.
For detail settings, please refer to the following table.
Module & description
SATA configuration
MezIO
TM
module
Description
SATA set to
<Auto>
MezIO-R11
1x 2.5” SATA HDD/ SSD
MezIO-R12
1x 2.5” SATA HDD/ SSD + 4-CH isolated DI and
4-CH isolated DO
SATA set to
<Disabled>
MezIO-U4-50
4x USB3.0 ports
MezIO-G4
4x GigE ports by 4x Intel® I210 controllers,
supporting 9.5 kB jumbo frame
NOTE:
For other MezIO™ modules, both Auto/ Disabled configurations are compatible.
To enable/ disable SATA configuration:
1. Press
F2
when the system boots up to enter the BIOS setup utility.
2.
Go to
[Advanced] > [SATA Configuration]
, press
ENTER
to bring up options, Disabled/ Auto.
3. Highlight your selection and press Enter and press
F10
to “Exit Saving Changes”.