manualshive.com logo in svg

APRILIA SR MAX 300 i.e., Руководство пользователя

Поделиться
Скачать
APRILIA SR MAX 300 i.e. Скачать руководство пользователя страница 70

CAUTION

DETERGENTS CAN POLLUTE WATER. THE VEHICLE MUST BE WASHED AT A
WASH STATION EQUIPPED WITH A SPECIAL WATER PURIFICATION SYSTEM.

IF YOU WASH THE ENGINE WITH A HIGH-PRESSURE WATER JET MACHINE:

• ONLY USE THE FAN JET.

• DO NOT PLACE THE WATER JET NOZZLE CLOSER THAN 60 CM.

• NOT USE WATER AT A TEMPERATURE OF OVER 40ºC.

• DO NOT USE THE JET AT HIGH PRESSURE.

• DO NOT STEAM CLEAN.

• DO NOT DIRECT THE JET AT: WIRING AND SLOT DIFFUSER ON THE TRANS-
MISSION COVER.

CAUTION

NEVER WASH THE SCOOTER IN DIRECT SUNLIGHT, ESPECIALLY IN SUMMER
WHEN THE BODYWORK IS STILL HOT AS THE SHAMPOO COULD DAMAGE
THE PAINTWORK IF IT DRIES BEFORE BEING RINSED OFF. NEVER USE
CLOTHS SOAKED IN ALCOHOL, PETROL, DIESEL OIL OR KEROSENE FOR
CLEANING THE PAINTED OR PLASTIC SURFACES, IN ORDER NOT TO DAM-
AGE THE LUSTRE FINISH OR ALTER THEIR MECHANICAL PROPERTIES. US-
ING SILICONE-BASED WAX CAN DAMAGE THE PAINTED SURFACES, DE-
PENDING ON THE VEHICLE COLOUR (SATIN COLOURS). FOR FURTHER
INFORMATION ON THIS MATTER, CONTACT AN AUTHORISED SERVICE CEN-
TRE.

70

3 Maintenance

Содержание SR MAX 300 i.e.



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды