manualshive.com logo in svg

APRILIA SR MAX 300 i.e., Руководство пользователя

Поделиться
Скачать
APRILIA SR MAX 300 i.e. Скачать руководство пользователя страница 50

03_11

Air filter cleaning (03_11)

1.

 Wash the sponge with water and neutral soap.

2.

 Dry it with a clean cloth and small blasts of compressed air.

3.

 Soak the sponge with a mixture of 50% petrol and 50% specified oil.

4.

 Gently squeeze the filter element without twisting it, let it drip and then refit it.

CAUTION

IF THE VEHICLE IS USED ON DUSTY ROADS IT IS NECESSARY TO CARRY OUT
MAINTENANCE CHECKS OF THE AIR FILTER MORE OFTEN TO AVOID DAM-
AGING THE ENGINE.

Recommended products

AGIP FILTER OIL

Oil for air filter sponge

Mineral oil with specific additives for increased adhesiveness

03_12

Cooling fluid level (03_12, 03_13, 03_14)

The engine is cooled by a forced-circulation coolant system. The cooling circuit holds
approx. 1.8 litres of coolant consisting of a mixture of 50% de-ionised water and 50%
glycol ethylene-based antifreeze solution with corrosion inhibitors. Recommended
coolant: supplied with the vehicle, already mixed and ready for use. For proper engine
functioning, coolant temperature must be between the 4th and 7th lit segment, as
indicated by the specific gauge indicator «

S

» on the digital instrument panel. When

the 9th segment lights up, the icon and all the segments start flashing; stop the engine,
let it cool down and check the fluid level; if the level is OK, contact an 

Authorised

Service Centre.

50

3 Maintenance

Содержание SR MAX 300 i.e.



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды