manualshive.com logo in svg

APRILIA SR MAX 300 i.e., Руководство пользователя

Поделиться
Скачать
APRILIA SR MAX 300 i.e. Скачать руководство пользователя страница 67

03_40

Front and rear disc brake (03_40)

The brake disc and pad wear is automatically compensated, therefore it does not have
any effect on brake functioning. For this reason it is not necessary to adjust the brakes.
An excessively elastic brake lever stroke may indicate the presence of air in the brake
circuit or a failure in the braking system. In this case, mainly due to the importance of
brakes to guarantee safe riding conditions, the vehicle should be taken to an 

Author-

ised Service Centre or Dealer

.

CAUTION

BRAKING SHOULD BEGIN AFTER ABOUT 1/3 OF THE BRAKE LEVER STROKE.

HAVE THE BRAKE PADS CHECKED BY THE DEALER ACCORDING TO THE
CHECKS SPECIFIED IN THE SCHEDULED MAINTENANCE TABLE. HOWEVER,
IN THE EVENT OF NOISES COMING FROM THE FRONT AND/OR REAR BRAK-
ING SYSTEM DURING OPERATION, IT IS ADVISABLE TO HAVE THE BRAKING
SYSTEM CHECKED BY AN AUTHORISED SERVICE CENTRE OR DEALER. AF-
TER REPLACING THE BRAKE PADS, DO NOT USE THE SCOOTER UNTIL YOU
HAVE OPERATED THE BRAKE LEVER SEVERAL TIMES IN ORDER TO ALLOW
THE PLUNGERS TO SETTLE AND THE LEVER STROKE TO BE SET TO THE
CORRECT POSITION.

CAUTION

THE PRESENCE OF SAND, MUD, SNOW MIXED WITH SALT, ETC. ON THE
ROAD, CAN DRASTICALLY REDUCE THE LIFE OF THE BRAKE PADS. IN OR-
DER TO AVOID THIS, WE RECOMMEND WASHING THE VEHICLE FREQUENTLY
WHEN RIDING IN THESE ROAD CONDITIONS.

67

3 Maintenance

Содержание SR MAX 300 i.e.



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды