manualshive.com logo in svg

APRILIA RSV MILLE - 2002, Руководство пользователя, Страница: 73 / 154

Поделиться
Скачать
APRILIA RSV MILLE - 2002 Скачать руководство пользователя страница 73

73

use and maintenance   

RSV mille TUONO 

- RSV mille R TUONO 

PRELIMINARY CHECKING OPERATIONS

Component

Check

Page

Front and rear disc brakes

Check the functioning, the idle stroke of the control levers, the fluid level and make sure there
are no leaks. 
Check the wear of the pads. 
If necessary, top up the fluid reservoir.

33, 34, 35, 

36, 87

Accelerator

Make sure that it works smoothly and that it is possible to open and close it completely, in all
steering positions.  If necessary, adjust and/or lubricate it.

88, 88

Engine oil

Check and/or top up if necessary.

42, 61

Wheel/tires

Check the tire surface, the inflation pressure, wear and any damage.
Remove any foreign matter that may be stuck in the tread grooves.

41

Brake levers

Make sure that they work smoothly.
Lubricate the joints and adjust the stroke if necessary.

43

Clutch

Check the operation of the clutch, the idle stroke of the control lever, the fluid level and any
leaks. 
If necessary, top up the fluid; the clutch must operate without jerking and/or slipping.

37, 38

Steering

Make sure that the steering rotates smoothly, without any clearance or slackening.

 –

Side stand

Make sure that it operates correctly.  Make sure that when the stand is let up or down there is
no friction and that the spring tension brings it back to its normal position. 
If necessary, lubricate joints. 
Make sure that the safety switch operates correctly. 

91, 96

Fastening elements

Make sure that the fastening elements are not loose. If necessary, adjust or tighten them.

 –

Drive chain

Check the slack.

73, 74

Fuel tank

Check the fuel level and top up, if necessary.
Check the circuit for leaks. 
Make sure that the fuel cap is correctly closed.

32, 75

Coolant

The coolant level in the expansion tank must be included between the “

FULL

” and “

LOW

”

marks.

39, 40

Engine stop switch 
(



 - 



)

Make sure that it operates correctly.

27

Lights, warning lights, horn, 
rear stoplight switch and 
electric devices

Check the proper functioning of the acoustic and visual devices.  Change the bulbs or intervene
in case of failure.

92

 – 104

MILLE_02_USA.FM  Page 73  Monday, August 5, 2002  9:56 AM

Содержание RSV MILLE - 2002



























































































































































Отзывы:

Нет отзывов