manualshive.com logo in svg

APRILIA RSV MILLE - 2002, Руководство пользователя, Страница: 66 / 154

Поделиться
Скачать
APRILIA RSV MILLE - 2002 Скачать руководство пользователя страница 66

66

use and maintenance   

RSV mille TUONO 

- RSV mille R TUONO 

MINIMUM TREAD DEPTH LIMIT (3):

front and rear 2 mm (

 3 mm) and in any

case not less than prescribed by the
regulations in force in the country where
the vehicle is used.

ENGINE OIL

Engine oil may cause serious damage
to the skin if handled daily and for long
periods. 

Wash your hands carefully after use.

KEEP AWAY FROM CHILDREN. 

DO NOT DISPOSE OF THE OIL IN THE
ENVIRONMENT.

Put it in a sealed container and take it to
the filling station where you usually buy
it or to an oil salvage center.

In case any maintenance operation
should be required, it is advisable to
use latex gloves.

If the engine oil pressure warning light
LED “

” comes on during the normal

operation of the engine, this means that
the engine oil pressure in the circuit is
insufficient. 

In this case, check the engine oil level,
see p. 91 (CHECKING THE ENGINE OIL
LEVEL AND TOPPING UP); if the level is
n o t   c o r r e c t ,   s t o p   t h e   e n g i n e
immediately and contact your local

aprilia

 Dealer.

Proceed with care. 

Do not spill the oil!

Take care not to smear any component,
the area in which you are working and
the surrounding area.  Carefully remove
any trace of oil.

In case of leakages or malfunctions,
contact your local 

aprilia

 Dealer.

Periodically check the engine oil level, see
p. 91 (CHECKING THE ENGINE OIL
LEVEL AND TOPPING UP).

For the engine oil change, see p. 85
( R E G U L A R   S E R V I C E   I N T E R V A L S
CHART) and p. 93 (CHANGING THE
ENGINE OIL AND THE OIL FILTER).

NOTE 

Use high-quality 15W – 50 oil,

see p. 143 (LUBRICANT CHART).

MILLE_02_USA.FM  Page 66  Monday, August 5, 2002  9:56 AM

Содержание RSV MILLE - 2002



























































































































































Отзывы:

Нет отзывов