APRILIA RSV mile Скачать руководство пользователя страница 49

Страница: 49 / 160

use and maintenance

RSV mille

RSV mille R

STEERING LOCK

Never attempt to place the ignition
switch in the locked “

” (LOCK) posi-

tion while the vehicle is moving. This
will cause loss of control of the vehicle
with possible subsequent accident, se-
rious injury or even death.

OPERATION

To lock the steering:

◆

Place the vehicle on the stand, see p. 83
(PLACING THE VEHICLE ON THE
STAND).

◆

Turn the handlebar completely counter-
clockwise (leftwards).

◆

Turn the key (2) to position “

” (OFF).

◆

Release the key (2)

NOTE

Turn the key (2) and steer the

handlebar at the same time.

◆

Press the key (2) and turn it counter-
clockwise (leftwards), steer the handle-
bar slowly until the key (2) reaches posi-
tion “

” (LOCK).

◆

Remove the key (2).

PARKING LIGHTS

When you have to park your vehicle in a
dark or badly lighted area (parking lot or
street), it is sometimes useful to leave the
parking lights on so that your vehicle will be
easily visible.

OPERATION

To leave the parking lights on:

◆

Lock the steering, see beside () without
extracting the key (2).

◆

Turn the key (2) to position “

”

(PARKING); the parking lights automati-
cally illuminate.

◆

Remove the key (2).

Do not leave the ignition switch (1) in the
“

” (PARKING) position for extended

periods of time, as this will cause the
battery to become completely run down.

Содержание RSV mile

































































































































































Результаты поиска

Содержание RSV mile

Отзывы:

Похожие инструкции для RSV mile

Бренды по названию

Популярные бренды

APRILIA RSV mile, Книга по эксплуатации и обслуживанию

Результаты поиска

Содержание RSV mile

Отзывы:

Похожие инструкции для RSV mile

Бренды по названию

Популярные бренды