APRILIA RSV mile Скачать руководство пользователя страница 64

Страница: 64 / 160

use and maintenance

RSV mille

RSV mille R

ADJUSTING THE CLUTCH LEVER

It is possible to adjust the distance betwe-
en the clutch lever (1) end and the grip (2),
by rotating the adjuster (3).

The positions “

” and “

” correspond to an

approximate distance of 105 and 75 mm,
respectively, between the lever end and
the grip.

The positions “

” and “

” correspond to in-

termediate distances.

◆

Push the clutch lever (1) forward and ro-
tate the adjuster (3) until the desired
number is positioned in correspondence
with the reference arrow.

ADJUSTING
THE FRONT BRAKE LEVER

It is possible to adjust the distance betwe-
en the front brake lever (4) end and the
throttle grip (5), by rotating the adjuster
(6).

The positions “

” and “

” correspond to an

approximate distance of 105 and 75 mm,
respectively, between the lever end and
the grip.

The positions “

” and “

” correspond to in-

termediate distances.

◆

Push the front brake lever (4) forward
and rotate the adjuster (6) until the desi-
red number is positioned in correspon-
dence with the reference arrow.

ADJUSTING THE SHIFT PEDAL

The shift lever (7) is adjusted to fit most ri-
ders during manufacture.

If you wish to adjust the shift lever:

◆

Place the vehicle on the stand, see p. 83
(PLACING THE VEHICLE ON THE
STAND).

◆

Loosen the screw (8).

◆

Rotate the eccentric (9) to adjust position
of the shift pedal (7) to your satisfaction.

◆

Tighten the screw (8) snugly, insuring
that the eccentric is firmly clamped in the
shift lever (10).

NOTE

If it is necessary to further adjust

the shift lever, contact your Local

aprilia

Dealer.

Содержание RSV mile

































































































































































Результаты поиска

Содержание RSV mile

Отзывы:

Похожие инструкции для RSV mile

Бренды по названию

Популярные бренды

APRILIA RSV mile, Книга по эксплуатации и обслуживанию

Результаты поиска

Содержание RSV mile

Отзывы:

Похожие инструкции для RSV mile

Бренды по названию

Популярные бренды