use and maintenance
RSV 1000 TUONO R
43
ADJUSTING THE REAR BRAKE
LEVER AND THE GEAR CHANGE
LEVER
The position of the control levers is
determined based on ergonomic principles
at the factory.
If necessary, it is possible to adjust the
position of the levers.
u
Position the vehicle on the stand, see
page 56 (PLACING THE VEHICLE ON
THE STAND).
u
Partially unscrew the screw (1).
u
Rotate the eccentric (2) until finding the
optimal position for the pedal (3).
u
Tighten the screw (1) and make sure that
the eccentric retains its position.
CAUTION
If the gear change lever needs further
a d j u s t m e n t , c o n t a c t a n
a p r i l i a
Authorised Dealer.
EXHAUST MUFFLER/EXHAUST
SILENCER
WARNING
T a m p e r i n g w i t h t h e n o i s e c o n t r o l
system is prohibited.
Owners are warned that the law may
prohibit:
– the removal or rendering inoperative by
any person, other than for purposes of
maintenance, repair or replacement, of
a n y d e v i c e o r e l e m e n t o f d e s i g n
incorporated into any new vehicle – for
the purpose of noise control – prior to its
sale or delivery to the ultimate purchaser
or while it is in use;
– the use of the vehicle after such device
or element of design has been removed
or rendered inoperative by any person.
Check the ex haust silencer and the
silencer pipes, making sure that there are
neither signs of rust, nor holes and that the
exhaust system works effectively.
If the noise produced by the exhaust
system increases, immediately contact
your
aprilia
Authorised Dealer
.
WARNING
Both exhaust silencers are equipped
with catalytic converter and become
very hot to the touch. Be careful!
Danger of burns!
1
3
2
APRum_TUONO_MY05_01_UK.book Page 43 Monday, September 26, 2005 5:15 PM
