APRILIA RS 660 2020, Руководство пользователя, Страница: 29 / 196

8) Gear selected (displayed only with engine running and vehicle moving);
9) PIT speed (chequered flag icon is displayed when function is active);
10) Information (if applicable) identifying map installed in ECU;
11) Ice hazard icon (displayed at temperatures from -15 °C (5 °F) to +3 °C (37.4 °F));
12) Ambient temperature (viewable in °C or °F);
13) Clock (time viewable in 24 or 12 hour format, without AM / PM indication);
14) Downshift / reverse shift status (where implemented);
15) Best lap;
16) Low battery voltage warning icon; Low tyre pressure alarm (where applicable);
17) Information relative to selected a-PRC levels.
02_11
LAP TIMER
From RACE mode only, pressing and holding MODE RIGHT accesses a screen dis-
playing the lap times recorded by the lap timer function.
Pressing and holding the button changes the digital display mode from RACE to LAP
TIMER, and then back to RACE.
Pressing and holding the MODE RIGHT button again cycles through the modes avail-
able.
While the vehicle is moving, the lap timer function is activated by pressing the high
beam flash button or the MODE SET button briefly.
Timekeeping starts when the button is pressed. If the button is pressed again within
5 seconds after starting timekeeping, the lap timer is reset. After this period of time,
when next pressed memorisation is carried out, with a consequent increase in the LAP
number and the successive measurement starts.
29
2 Vehicle