APRILIA PEGASO 650 IE - 2003 страница 82 Скачать руководство пользователя

Страница: 82 / 112

use and maintenance

Pegaso 650 I.E.

!$*534).' 4(% !##%,%2!4/2

#/.42/,

Carefully read p. 55 (MAINTENANCE).

Ha ve t he acceler ato r contr ol cable s
checked by an

aprilia

Official Dealer after

the first 1000 km (625 mi) and successively
every 6000 km (3750 mi).

The idle stroke of the throttle grip must be

2–3 mm

, measured on the edge of the grip

itself.

If not, proceed as follows:

◆

Position the vehicle on the stand, see p.
52 (POSITIONING THE VEHICLE ON
THE STAND).

◆

Withdraw the protection element (1).

◆

Loosen the lock nut (2).

◆

Rotate the adjuster (3) in such a way as
to restore the prescribed value.

◆

After the adjustment, tighten the lock nut
(2) and check the idle stroke again.

◆

Put back the protection element (1).

CAUTION

After the adjustment, make sure that the
rotation of the handlebar does not mod-
ify the engine idling rpm and that the
throttle grip returns smoothly and auto-
matically to its original position after
being released.

!$*534).' 4(% #/,$ 34!24

#/.42/,

Carefully read p. 55 (MAINTENANCE).

Have the acce lera tor con tro l ca bles
checked by an

aprilia

Official Dealer after

the first 1000 km (625 mi) and successively
every 6000 km (3750 mi).

The idle stroke of the cold start control (4)
must be

2–3 mm

, measured on the edge of

the control itself.

If not, proceed as follows:

◆

Position the vehicle on the stand, see p.
52 (POSITIONING THE VEHICLE ON
THE STAND).

◆

Withdraw the protection element (5).

◆

Loosen the lock nut (6).

◆

Rotate the adjuster (7) in such a way as
to restore the prescribed value.

◆

After the adjustment, tighten the lock nut
(6) and check the idle stroke again.

◆

Put back the protection element (5).

CAUTION

After the adjustment, make sure that the
rotation of the handlebar does not mod-
ify the engine idling rpm.

Содержание PEGASO 650 IE - 2003

















































































































Результаты поиска

Содержание PEGASO 650 IE - 2003

Отзывы:

Похожие инструкции для PEGASO 650 IE - 2003

Бренды по названию

Популярные бренды

APRILIA PEGASO 650 IE - 2003, Руководство пользователя

Результаты поиска

Содержание PEGASO 650 IE - 2003

Отзывы:

Похожие инструкции для PEGASO 650 IE - 2003

Бренды по названию

Популярные бренды