APRILIA DORSODURO 750 ABS 2015 Скачать руководство пользователя страница 82

Страница: 82 / 146

03_27

•

With throttle grip (2) closed (

Pos. A

) and engine at idle, operate the clutch

lever (3).

•

Push the gearbox lever (4) downward to select the first gear.

•

Release the clutch lever (activated during start-up).

CAUTION

WHEN TURNING OFF THE VEHICLE, DO NOT RELEASE THE CLUTCH TOO
QUICKLY OR SUDDENLY, AS THIS COULD CAUSE THE ENGINE TO STOP OR
THE VEHICLE TO REAR UP ON THE BACK WHEEL. DO NOT ACCELERATE
SUDDENLY WHEN RELEASING THE CLUTCH FOR THE SAME REASON.

03_28

•

Slowly release the clutch lever (3) and at the same time accelerate by slightly
twisting the throttle grip (2) (

Pos. B

The vehicle starts moving forward.

•

For the first kilometres travelled, limit the speed in order to warm up the en-
gine.

DO NOT EXCEED THE MAXIMUM RECOMMENDED ENGINE SPEED.

•

Accelerate gradually by twisting the throttle grip (2) (

Pos. B

) without exceed-

ing the recommended rpm.

To engage the second gear:

RIDE IN THE CORRECT GEAR AND SPEED FOR THE CONDITIONS.

DO NOT OPERATE THE ENGINE AT A TOO LOW RPM LEVEL.

3 Use

Содержание DORSODURO 750 ABS 2015



















































































































































Результаты поиска

Содержание DORSODURO 750 ABS 2015

Отзывы:

Похожие инструкции для DORSODURO 750 ABS 2015

Бренды по названию

Популярные бренды

APRILIA DORSODURO 750 ABS 2015, Руководство пользователя

Результаты поиска

Содержание DORSODURO 750 ABS 2015

Отзывы:

Похожие инструкции для DORSODURO 750 ABS 2015

Бренды по названию

Популярные бренды