APRILIA DORSODURO 750 ABS 2015 Скачать руководство пользователя страница 65

Страница: 65 / 146

Lights, warning lights, horn, rear
stop light switch and electrical
devices

Check function of horn and lights.
Replace bulbs or repair any faults
noted.

Tone wheels (only for vehicles with
ABS system)

Check that the tone wheels are
perfectly clean

03_02

03_03

Refuelling (03_02, 03_03)

To refuel:

•

Lift the cover (1).

•

Introduce the key (2) in the fuel tank cap lock (3).

•

Turn the key anticlockwise, lift and remove the fuel filler cap.

•

Refuel.

CAUTION

DO NOT ADD ADDITIVES OR ANY OTHER SUBSTANCES TO THE FUEL.

WHEN USING A FUNNEL, ENSURE THAT IT IS PERFECTLY CLEAN.

WHEN FILLING THE TANK COMPLETELY, DO NOT FILL BEYOND THE LOWER
EDGE OF THE RECESS (SEE FIGURE).

WHEN REFUELLING, AVOID FUEL LEAKS THAT MAY CAUSE DAMAGES TO
PROPERTIES AND/OR PEOPLE AND FIRE HAZARD.

3 Use

Содержание DORSODURO 750 ABS 2015



















































































































































Результаты поиска

Содержание DORSODURO 750 ABS 2015

Отзывы:

Похожие инструкции для DORSODURO 750 ABS 2015

Бренды по названию

Популярные бренды

APRILIA DORSODURO 750 ABS 2015, Руководство пользователя

Результаты поиска

Содержание DORSODURO 750 ABS 2015

Отзывы:

Похожие инструкции для DORSODURO 750 ABS 2015

Бренды по названию

Популярные бренды