EN
6
CLEANING AND MAINTENANCE
* Please turn off the shaver before clean.
* Clean the shaver regularly could keep better shaving effect.
Components cleaning
* Clean the shaving head once a week.
* Use the attached cleaning brush to clean the shaver from the top Şrst.
* Push the release button, and then open the shaving head.
* Clean the beard carbine by the brush.
Cutter cleaning
* Clean the cutter once every two months.
* Push the release button, and the open the shaving head.
* Rotate the Şxing stand knob of cutter counterclockwise, and take the Şxing
stand of cutter down.
* Take the cutter down from head cover in sequence.
* Use the cleaning brush to clean the blades.
* Use the cleaning brush to lean the foils.
* If necessary, use a fat removal liquid (like alcohol) to clean the foils;and lubricate
the foil with a drop of sewing machine oil, it can prevent foils from being worn up.
* Install the cutters back into the head cover, and then install the Şxing stand of
cutter back to the shaving head.
