Applikon ADI 1075, Инструкция по установке/руководство по оборудованию, Страница: 5 / 31

INSTALLATION AND HARDWARE MANUAL
ADI 1075 Pilot System
GENERAL
December 2002
1-1
A
B
C
D
CHAPTER 1
GENERAL
The Applikon range of controlled in situ sterilizable Pilot Systems can be represented by the
following image:
Where: A = the bioreactor,
B = the frame,
C = t h e A D I 1 0 7 5
actuator console
c o n t a i n i n g
temperature and
stirrer control and
with actuators like
pumps and valves,
D = the ADI 1040/21
Control Console
Interface containing
I/O hardware,
E = the Bio Controller
ADI 1010.
The bioreactor system and the
described hardware can be operated as
a stand alone unit.
This hardware manual describes the ADI 1075 Pilot System actuator console with all actuators
that can be incorporated in it.
Also refer to the following manuals:
S
Hardware & Installation manual of the ADI 1010 Bio Controller,
S
Firmware Reference manual,
S
Operator manual of the ADI 1010 Bio Controller and ADI 1075 Pilot System,
S
Hardware manual of the bioreactor,
S
PID Control manual.
For information concerning the stirrer speed controller and stirrer motor also refer to the manual
of the applied ADI 1032 stirrer speed controller.