Applied Comfort VI20HA09K25E6PA30, Инструкция по установке и руководство пользователя

Страница: 13 / 20

-
12
-
(3)Ductwork
Prepare the closet ductwork for later connection
to the case.
The total flow rate(CFM) and external static
pressure (ESP) available can be estimated from
the chart below.
The collar on top of the case accepts standard
10"duct.Pull all duct tight. Extra duct slack can
greatly increase Static pressure.
NOTICE:
Flex duct can collapse and cause
airflow restrictions. Do not use flex duct for 90°
bends or unsupported runs of 5 ft. or more.
Your airflow should be balanced based on many
factors such as available ESP room CFM. and
ductwork. Consult an HVAC engineer for proper
applications. External static pressure ( ESP )
can be measured with a manometer or pitot
tube. Once this ESP is established you can
calculate the CFM use above char
(4)Install And Connect The Case
1. Remove the front case panel and pull the unit
out of the case. Place the empty case onto the
platform in the closet with the outdoor side facing
the wall plenum opening. Align the case with
plenum opening and attach.
High
CFM
Medium
CFM
Medium
CFM
Low
CFM
0.00 550 425 425 410
0.04 515 395 395 375
0.10 465 350 350 320
0.15 440 300 300 270
0.20 405 240 240 205
0.25 365 180 180 120
0.30 310 - - -
0.00 550 475 475 410
0.04 515 440 440 375
0.10 465 390 390 320
0.15 440 355 355 270
0.20 405 300 300 205
0.25 365 235 235 120
0.30 310 180 180 -
0.00 - - 550 475
0.04 - - 515 440
0.10 - - 465 390
0.15 - - 440 355
0.20 - - 405 300
0.25 - - 365 235
0.30 - - 310 180
OFF
15K
Airflow -CFM
ESP
(in.water)
09K
12K
Indoor Fan CFM
Duct Select Switch
ON
Inside
wall
metal duct
Air
discharge
outlet
Leveling legs
3. Using field-supplied screws, bolt the case to the
platform.
4
.
2
.
Primary female
drain fitting 3/4”
Bolt case
to platform
External
drain
OR
Internal
Drain(s)
NOTE: Piping is not
supplied with the unit.
Obtain locally.