manualshive.com logo in svg

Applied Biosystems SimpliAmp Thermal Cycler, Руководство пользователя, Страница: 22 / 92

Поделиться
Скачать
Applied Biosystems SimpliAmp Thermal Cycler Скачать руководство пользователя страница 22

Load samples into the instrument

Note: 

Refer to How to Use MicroAmp

™

 Reaction Plates, Tube Strips, and Tubes (Pub. no.

100033471) for instructions on filling, sealing, and loading MicroAmp

™

 reaction

plates, tube strips, and tubes.

The steps for placing the sample tray on the sample block(s) are the same for:

• A sample tray/retainer
• A sample tray without a retainer
• A 96-well plate.

1.

Lift the sample tray from the splash-free 96-well base and place it in the sample

block(s).

2.

Place the MicroAmp

™

 Tray or Plate onto the sample block(s) so that well A1 is at

the upper left corner of the tray, as shown in the following figure:

Figure 19   

MicroAmp

™

 Optical 96-Well Reaction Plate (0.2 mL)

3.

Close the heated cover.

Perform a run

Prepare your samples and load the sample block(s) as described in “Load samples

into the instrument“ on page 22.

1.

Close the cover.

2.

Start a run from the Home screen in one of the following ways. Touch:
• New Method
• Open Method
• Incubate
• Status dial

Note: 

See “Create a new run method“ on page 14 to create a new run method or

see “Edit a run method“ on page 16 to edit an existing run method.

Place the sample

tray or plate onto

the sample

block(s)

Chapter 3 

 Create and run experiments on the instrument

Load samples into the instrument

3

22

 SimpliAmp

™

 Thermal Cycler User Guide

Содержание SimpliAmp Thermal Cycler





























































































Отзывы:

Нет отзывов