h
Timer on Button:
Press this button to initiate the auto-on time sequence. Each press will increase the
auto-timed setting in 30 minutes increments. When the setting time displays 10Hr, each press will incre-
ase the auto-timed setting 60 minutes increments. To cancel the auto-timed program, continue pressing
the button until time setting is 0.0.
i
Timer off Button:
Press this button to initiate the auto-off time sequence. Each press will increase the
auto-timed setting in 30 minutes increments. When the setting time displays 10Hr, each press will incre-
ase the auto-timed setting 60 minutes increments. To cancel the auto-timed program, continue pressing
the button until time setting is 0.0.
j
RESET Button:
When you press the recessed RESET button, all current settings are cancelled and the
control will return to the initial settings.
k
LOCK Button:
When you press the recessed LOCK button, all current settings are locked in and the
remote controller does not accept any operation except that of the LOCK. Press again to cancel the
LOCK mode.
l
LED DISPLAY Button:
Press this button to clear the digit display in the air conditioner, press it again
to activate it, max. 30 minutes. (Not applicable to units without this function).
m
TURBO Button:
Push this button on COOL mode, the air conditioner goes into powerful cooling ope-
ration. Push again to cancel the TURBO function. (Not applicable to units without this function)
n
Follow Me function:
The remote control serves as a remote thermostat allowing you to precisely
adjust the temperature at the location of the remote control near you. To activate the Follow Me fea-
ture, point the remote control towards the unit and press the Follow Me button. The display on the
remote control shows the actual temperature at its location. The remote control will send this infor-
mation to the air conditioner every 3 minutes, until the Follow Me button is pressed again. If the unit
does not receive the Follow Me signal for 7 minutes, the unit will beep to indicate that the Follow Me
mode has ended.
o
CLEAN AIR function:
Air quality is the key to comfort, this air conditioner is equipped with Ionizer
device. Ionizer can generate abundant anions to fill the room with refreshing and nature air. Your
whole family will enjoy a natural, pure and healthy air everyday.
p
Auto Clean function (optional):
Function used after the Shut Down of cooling operation to clean
the Evaporator and keep it as fresh for the next operation. This function is only available under
COOL(AUTO COOL, FORCED COOL) and DRY mode. Once the Auto Clean function is activated, all TIMER
setting will be cancelled. During Auto Cleaning operation, Press the AUTO CLEAN button again will
stop the operation and turn off the unit.
Names and Functions of indicators on Remote Controller
TIMER ON OFF
SET TEMPERATURE
4
2
1
3
4
7
8
6
5
4
fig. 4
109
man_AAC design 11000_1.qxd 07-03-2008 14:22 Pagina 109
