4
110
Display Panel
a
DIGITAL DISPLAY area:
This area will show the set temperature and, if in the TIMER mode, will show
the ON and OFF settings of the TIMER. If in the HEALTH mode, nothing is appeared.
b
TRANSMISSION Indicator:
This indicator lights when remote controller transmits signals to the indoor
unit.
c
ON/OFF Indicator:
This symbol appears when the unit is turned on by the remote controller, and disap-
pear when the unit is turned off.
d
OPERATION MODE Indicator:
When press the MODE button, it shows the current operating mode --
AUTO COOL DRY HEAT (Cooling only model without) HEALTH mode.
e
LOCK Indicator:
LOCK display is displayed by pushing the LOCK button. Push the LOCK button to clear
display.
f
TIMER DISPLAY Indicator:
This display area shows the settings of the TIMER. That is, if only the star-
ting time of operation is set, it will display the TIMER ON. If only the turning off time of operation is
set, it will display the TIMER OFF. If both operations are set, it will show TIMER ON-OFF which indicates
you have chosen to set both the starting time and off time.
g
FAN SPEED Indicator:
Press the FAN SPEED button to select the desired fan speed setting (Auto-Low-
Med-High). Your selection will be displayed in the LCD window except the Auto fan speed.
h
FOLLOW ME Indicator:
This symbol appears when the FOLLOW ME button is pressed
Operating the Remote Controller
Install / Replace Batteries
Use two dry alkaline batteries (AAA/LR03).
Do not use rechargeable batteries.
1.
Remove the battery cover on the back of the Remote Control by pulling it according to the arrow
direction shown on the cover.
2.
Insert new batteries making sure that the (+) and (-) of battery are installed correctly.
3.
Reattach the cover by sliding it back into position.
AUTOMATIC Operation
When the Air Conditioner is ready for use, switch on the power and the OPERATION indicator lamp on the
display panel of the indoor unit starts flashing.
1.
Use the
Mode
select button to select AUTO.
G
NOTE!
• When replacing batteries, do not use old batteries or a different type battery. This may cause
the remote controller to malfunction.
• If you do not use the remote controller for several weeks remove the batteries. Otherwise
battery leakage may damage the remote controller.
• The average battery life under normal use is about 6 months.
• Replace the batteries when there is no answering beep from the indoor unit or if the
Transmission Indicator light fails to appear.
• Never mix new and old batteries. Never use different battery types (e.g. alkaline and
manganese dioxide) simultaneously.
G
NOTE!
All signs shown in the Fig.4 is for the purpose of clear presentation. But during the actual
operation only the relative functional signs are shown on the display panel.
man_AAC design 11000_1.qxd 07-03-2008 14:22 Pagina 110
