600840-000032 Stratus ESG Installation Instructions
Rev. 1.5
Last Revised: September 22, 2016
Page 27 of 47
While in configuration mode, use the following keys:
Key
Function
FUNC
Cycle through the configuration screens
Cancel an input
ENT
Edit a configuration
Confirm an input
Arrow keys
Cycle through the configuration screens
Cycle through selections within configurations
Number keys
Input numbers, letters, or spaces
PWR
Exit configuration mode
Table 23: Keys used during configuration
Sometimes, a textual or non-numerical input will be required. If this is the case, press the
number that is associated with the letter group you want to input, according to the graphic on
the screen. To cycle through the letters associated with each number, press the number key
repeatedly until the letter you want to input appears. You can input a space after cycling through
all of the letters for a particular number key. Once the correct character is selected, use the right
arrow key to advance to the next field to enter the next character in the sequence.
4.1.
ICAO address
Enter the aircraft’s 6 digit hex code.
4.2.
VFR squawk
Enter the VFR squawk code. The default factory setting is 1200.
NOTE
: If you enter an emergency squawk code (7500—hijacking, 7600—radio failure, or
7700—emergency), a warning will appear. Press
ENT
to clear the warning and enter a new
squawk code.
4.3.
Aircraft registration
Enter the aircraft’s tail number (registration number).
4.4.
Aircraft airspeed category
Select the range of numbers that includes the aircraft’s maximum airspeed.
