APP EM-4102 Скачать руководство пользователя страница 2

This unit has a front and rear ventilation holes

 

to avoid affecting the inside device 

cooling, do not block them

.

 Otherwise it may cause a fire.

Specially attention: 

 

Do not place the unit on its side or upside down.

 

Do not place the unit in poorly ventilated places, such as a bookcase or closet.

 

Do not use tablecloths to cover the unit, or put it on the carpet and the bed.

Hold the insulation of the plug when unplug the power cord from the AC outlet. Do 
not pull the cable directly. Otherwise it may damage the cord, which leads to a fire or 
electric shock.

Do not touch the power plug with wet hands. Otherwise it may cause electric shock.

Leave enough space around the unit, in order to facilitate proper ventilation. 
The space should be:
At least 10 cm for both sides, at least 10 cm for above.

If it can not keep enough air flow, the unit

'

s internal temperature will rise that 

may cause a fire.

To relocate the unit, please unplug the power from the AC plug and unplug all connect
-ed cables. Otherwise it may damage the cables then lead to a fire or electric shock.

Only can plug the unit to the AC outlet which is instruct in the user manual or the 
specifications shown on the adapter. Otherwise it may cause fire or electric shock.

Do not allow water to enter the unit or to make it damp. Otherwise it may cause fire or 
electric shock.

Do not place a container with liquid or small metal objects on the unit. Otherwise,liqu
-id or small metal objects will fall inside the unit that may cause fire or electric shock.

Do not place heavy objects (including this unit) on the power cord, especially which is 
covered by the carpet

Otherwise it may damage the power cord, which will lead to a 

fire or electric shock.

 

Avoid using the unit in the following places:

  Expose it under the high humidity environments or the places with dust 

accumulation.

  Expose it under

 

the splashing oil foam and steam, such as near cooking stoves, 

humidifiers and other places.

  Expose it under the hot environments, such as the car with all the windows be 

closed or subject to direct sunlight.

  At the unstable surface, such as the shaking desktop or slope.

Do not place the power cable near the heaters. Otherwise it may lead to melt, then 
causing a fire.

IMPORTANT SAFETY INSTRUCTIONS

As the accessories of the unit (such as machine feet, manual bag, desiccant, etc.), 
please put it on the place which the children can not catch easily. 

Do not scratch, bend, twist, stretch, or heat the power cord. Otherwise it may damage 
the power cord, and then will lead to a fire or electric shock.

01

Σ

M

 

SERIES

 

PROFESSIONAL

 

POWER

 

AMPLIFIER

Содержание EM-4102

















Отзывы: