5
Preparing to use your Apollo Mighty-Mist™ Spray Tanning System
Connect the air hose to the Turbine, pull back the spring-loaded quick disconnect coupler and insert
the male connector on the air hose into the turbine connector. Release the ring. Your air hose will be
locked into place, when you hear a click. To disconnect, push back on the connector to release.
If you have just finished spraying, the metal coupler at the turbine
end may be hot!
Plug the electric cord into a correctly grounded electrical outlet. Be sure the electric current is the
correct voltage. If you need to use an extension cord, be sure to follow the chart on page 2 and make
sure to use a correctly grounded outlet.
Select a safe, well-ventilated area where you will spray your client. Locate your Turbine unit as far
away from the area where you will be directly spraying.
Familiarizing yourself with your Apollo T6000 Spray Gun
1. Follow the diagram to prepare the Spray Gun
a. Unscrew the plastic cup from the Spray Gun. Pour tanning solution into the cup. Do not fill
more than ¾ full.
b. Carefully screw the cup back onto the main body of the Spray Gun. Screw the cup on firmly
but
DO NOT over tighten
.
Over tightening will cause the cup to “pop” and damage the
threads. Leakage can then occur requiring replacement of the cup.
c. Locate the air cap (#2) on the T6000 diagram. Slightly turn the air cap ring (#1) anti or
counter clockwise to loosen the air cap. Notice that you can now rotate the air cap freely.
d. Look at Mist Applicator Patterns diagram below. Note the position of the air cap and the
direction of the spray pattern. Pattern 1 is for spraying across from side to side. Pattern 2 is for
spraying up and down. Pattern 3 will produce a spot or circle. Patterns 1 and 2 are the most
common positions for applying tanning solutions.
e. Turn the air cap (#2) to the position you want. Turn the air cap ring (#1) clockwise to lock the
air cap in place.
Содержание Mighty-Mist T6000
Страница 9: ...9...
