Apollo Mighty-Mist T6000, Инструкция по эксплуатации

Страница: 4 / 10

4
How your Apollo Mighty-Mist® Spray Tanning System Works
Your Apollo Mighty-Mist™ Spray Tanning System has three components: the turbine (motor) unit, an
air hose and the spray gun. The Turbine unit, when connected to the correct electrical power supply
and with the on/off switch in the “on” position provides a continuous source of clean, warm, dry, low
pressure turbo air. The air hose connects the turbine unit to the spray gun. Air flows through the hose
to the nozzle of the Apollo T6000
spray gun. Atomization of the tanning solution is achieved when the
high Cubic Feet per Minute (CFM) of airflow mixes with the stream of fluid passing through the
specialty designed tip/nozzle. This low-pressure atomization principle achieves minimum misting
(overspray) to the spray environment and maximum solution transfer efficiency to the client because
of less “Bounce Back”.
Bounce Back Comparisons
Air Brush Spray Systems Apollo Mighty-Mist™ Spray Tanning System
Conventional spray systems: TrueHVLP™ Tanning System
12-20 PSI @ 8 CFM 3.2 PSI @ 85 CFM
- 30-50% transfer efficiency - Up to 90% transfer efficiency
- Excessive, costly Solution waste - Substantial Solution savings - Unhealthy for
operator and - Cleaner and safer for both harmful to the environment operator
and environment
The Mighty-Mist™ Turbine has one air hose outlet on the front of the unit and is designed to run one
spray gun.