2
DO NOT USE EQUIPMENT BEFORE READING THIS SECTION
The Apollo Mighty-Mist™ should only be used with approved non-flammable spray solutions.
In order to assure safe operation of your spray tanning system, please read the following instructions
carefully.
•
Always follow solution manufacturer’s safety instructions and warnings.
•
Always spray in a well-ventilated area.
•
We recommend that you use an approved face mask. Always store indoors, never allow unit to
freeze.
•
Always use original manufacturers replacement parts
•
Never spray flammable materials from the Spray Tanning Center. .
•
Never alter or modify any part of this equipment; doing so can cause equipment malfunction and/or
bodily injury.
•
Never attempt to clean any part of the turbine motor while it is plugged in.
•
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE TO WATER.
•
Never leave spray equipment unattended. Keep away from children or any person not familiar with
spray equipment.
GROUNDING INSTRUCTIONS
This product should be grounded. In the event of an electrical short circuit, grounding reduces the risk of
electrical shock by providing an escape wire for the electric current. This product is equipped with a cord that
has a grounding wire and appropriate grounding plug. The plug must be plugged into an outlet that is properly
installed and grounded in accordance with all local codes and ordinances. Do not operate unit with a damaged
cord or plug. Do not pull or carry unit by the cord. Keep away from heated surfaces. Do not unplug by pulling
on the cord.
Improper installation of the grounding plug can result in the risk of electric
shock. Check with a qualified electrician or service member if in doubt as to
whether the product is properly grounded. Do not modify the plug provided. If it
will not fit the outlet, have the proper outlet installed by a qualified electrician. Make sure that the spray-tanning
center is connected to an outlet with the same configuration as the plug. DO NOT USE ANY ADAPTERS
WITH THIS PRODUCT.
Be sure that you are plugging the unit into a proper outlet for the electric current designed for your spray
system. Incorrect voltage will damage or burn out the motor.
USING EXTENSION CORDS
Use only a three-wire extension cord with a 3-slot receptacle similar to the plug on the turbine. Make sure your
extension cord is in good condition. When using an extension cord, be sure to select one that will carry a
heavy enough current for the turbine motor. An undersized cord will cause a drop in the line voltage resulting
in loss of power and overheating. If in doubt use the next heavier gauge. The smaller the gauge number, the
heavier the wire thickness. Please use the chart below as a guide to selecting the proper size extension cord.
For length less than:
Use extension gauge:
25ft
(7.62m)
16AWG
50ft
(15.24m)
14AWG
100ft
(30.48m)
12AWG
150ft
(45.72)
10AWG
Содержание Mighty-Mist T6000
Страница 9: ...9...
