7
Apollo Design Technology, Inc.
260.497.9191 •
ApolloDesign.net
Menu Tree
ADDRESSING
ADDRESS “Addr”
• DMX address up
• DMX address down
FAN “FAn”
“=_1_” Low speed fan
“=–2–” Medium speed fan
“=–3–” High speed fan
“=PL1” Sets DMX fan speed control to start a1
“=512” Sets DMX fan speed control to channel 512
Speed “SPd”
“=_1_” Sets motor speed to low
“=–2–” Sets motor speed to medium
“=–3–” Sets motor speed to high
Reset “rSt”
“=NO” Remote reset is off
“=YES” Allows for Smart Color
®
Pro reset from console
Enter DMX address for reset control
• Each Smart Color
®
Pro can respond to a unique start address. To change the
DMX address press the SELECT, UP or DOWN button once. “Addr” will appear.
Press SELECT to select the addressing mode. Pushing the UP and DOWN
buttons will step through DMX addresses. The addresses advance slowly for
the first three seconds, then the DMX addresses advance or retreat at a much
faster rate.
• After the desired DMX start address appears in the LED window, press SELECT
to set the address.
• TheSmart Color
®
Pro is a two channel device if fan speed is set to “PL1.”
The first channel controls the gel string and the second channel controls
the fan speed.
• The LED display will show “Addr” when the addressing sequence is complete.
