11
Apollo Design Technology, Inc.
260.497.9191 •
ApolloDesign.net
Gel String Installation
• Place the gel string and two gel rollers inside the Smart Color
®
Pro.
• Line up the left roller with the top guide pin. Push the gel roller toward the top
of the Smart Color
®
Pro.
• Swing the bottom of the gel roller towards the hub drive.
• Line up the bottom of the gel roller over the hub drive.
• Rotate the hub drive until the pin seats fully in the bottom of the gel roller.
• Repeat the process for the right gel roller.
GEL FRAME DIMENSIONS
(WxH)
Smart Color
®
Pro 5.25
Exterior Frames:
15" x 6.025" (381mm x 153mm)
Interior Frames:
12" x 6.025: (305mm x 153mm)
Smart Color
®
Pro 7.25
Exterior Frames:
15" x 8" (381mm x 203mm)
Interior Frames:
13" x 8" (330mmx 203mm)
Smart Color
®
Pro 10
Exterior Frames:
19" x 10.75" (483mmx 273mm)
Interior Frames:
16" x 10.75" (406mm x 273mm)
• Apollo Gel Shield is installed on the back of the Smart Color
®
Pro. The shield
filters out harmful ultraviolet and infrared rays that could damage the gel
strings. Be sure the shield is in place before operating the Smart Color
®
Pro.
The Smart Color
®
Pro
has been designed for
easy installation and
removal of gel string
assembly. The front cover
has been removed for
clarity. The front cover
should be in place during
the installation process.
