8
Apollo Design Technology, Inc.
260.497.9191 •
ApolloDesign.net
Menu Tree
FAN
• To change the fan speed press the SELECT, UP or DOWN button once. Press the
DOWN button once. “FAn” will appear. Press the SELECT button to select fan
control mode.
• Press the UP or DOWN button to scroll through the fan options.
• Selecting “=_1_” will set the fan to run constantly at low speed. Use this setting
when the Smart Color
®
Pro is being used with low wattage fixtures or in
situations requiring quiet operation.
• Selecting “=–2–” will set the fan to run constantly at medium speed.
• Selecting “=–3–” will set the fan to run constantly at high speed. Use this
setting when the Smart Color
®
Pro is being used on high wattage fixtures or
when maximum cooling is required.
• Selecting “= PL1” will set the fan to be controlled at the Smart Color
®
Pro's
DMX start address plus 1. For example, if the start address for the Smart Color
®
Pro is channel 001, the fan will be controlled by channel 002. With the fader
for channel 002 at 100% the fan will operate low speed.
• Selecting “= 512” will set the fan to be controlled by DMX channel 512. Again,
with the fader at 0% the fan will operate at high speed. With the fader at 100%
the fan will operate at low speed.
• Press the SELECT button to set fan speed.
SPEED
• To change the motor speed press the SELECT, UP or DOWN button once. Press
the DOWN button twice. “SPd “ will appear. Press the SELECT button to select
speed control mode.
• Press the UP or DOWN button to scroll through the speed options.
• Selecting “=_1_” will set the motor to run at low speed. Use this setting when
the Smart Color
®
Pro is being used in situations requiring quiet operation.
• Selecting “=–2–“ will set the motor to run at medium speed.
• Selecting “=–3–” will set the motor to run at high speed. Use this setting when
the Smart Color
®
Pro is being used in situations requiring fast operation.
• Press the “SELECT” button to set motor speed.