Apollo Happy-Mist, Инструкция по эксплуатации

Страница: 9 / 13

9
5 Spraying/Misting
a. You are now ready to begin misting.
b. The ON/OFF Switch is located under the carry handle of the HAPPY-MIST™ Turbo Unit. Turn it on.
You will hear a sound similar to a vacuum cleaner. You may also notice that air is now blowing out of
the front of the
Spray Gun. This is correct. Air will continually flow from the air cap of the Spray Gun as long as the
HAPPY-MIST™ Turbo Unit is running and the air hose is connected.
c. Open the Solution Flow Screw as described in item 4.
d. Set the mist pattern you wish to use by adjusting the air cap to the desired position. Refer to Mist
Pattern Diagram.
e. Direct the Spray Gun to the area of the body that you want to start spraying.
f. Pull back on the trigger (#13) and move the Spray Gun as noted in the diagram below. Do not wave the
Spray Gun back and forth in front of your client by bending your wrist. Rather, keep your wrist straight
and move your entire arm. Movement should be steady, even and deliberate, keeping your distance the
same at all times.
PROPER MISTING TECHNIQUE