manualshive.com logo in svg

api technologies corp. 7608AD Series, Инструкция по установке и эксплуатации

Поделиться
Скачать
api technologies corp. 7608AD Series Скачать руководство пользователя страница 46

Installation and Operation Manual

ECN: 003155

Date: 06/4/2013

46

AC-SmartStart-7608-Series_IOM Rev 04

LAN Module & Communications

7.8.6 Outlet Control

The Outlet Control dialog allows direct control of the PDU outlets, either individually 

or in sequenced operations. The exact items displayed and whether they are enabled 

depends on the type of unit (1x8 or 2x4) and the privileges of the currently logged-in 

user.  If an outlet is manually turned off, it will not be included in the automatic or power 

on sequences

Figure 7.17  Web Interface Outlet Control

The Outlet Control dialog contains the following items:

Item

Function

Outlet Names

Names of outlets as defined in the Unit Setup dialog.

Outlet On/Off Buttons

Turns the associated outlet on or off

Outlet Group Names

Names of outlet groups as defined in the Unit Setup dialog.

Outlet Group On/Off 

Buttons

Turns the associated outlet group on or off

On Sequential Buttons

Sequences on outlets (all outlets, channel A outlets, or 

channel B outlets)

Off Sequential Buttons

Sequences off outlets (all outlets, channel A outlets, or chan-

nel B outlets)

Off Simultaneous

Turns off all outlets simultaneously.

Содержание 7608AD Series



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды