Installation and Operation Manual
ECN: 003155
Date: 06/4/2013
39
AC-SmartStart-7608-Series_IOM Rev 04
LAN Module & Communications
7.6.12 Enable Command Logging
Select 11 to enable logging of commands received and processed by the PDU. The
commands will be displayed on the port selected by menu option 10. The feature is
used for security and troubleshooting purposes.
7.6.13 Enable Polling
Select 12 to disable the LAN module. This will cause the LAN module to not
communicate with the PDU.
7.6.14 Exit Configuration Mode
Select
88
exit the configuration mode without saving any changes, or select
99
to exit
and save all changes. All values are stored in nonvolatile RAM. The LAN Module will
automatically reset but the state of the PDU outputs will not be affected.
7.7 WEB Interface
Remote users can monitor and control the PDU with a standard web browser. When the
“home page” is requested, the browser receives a web page containing an embedded
Java applet. The applet establishes a connection with the agent and provides a user in-
terface for monitoring and controlling the PDU. Due to the amount of graphics and LAN
connection speeds within a network, the initial page could take several
seconds to display.
7.8 Monitor Screen
The device applet initially displays the following screen. Please note that this screen is
slightly different for 1x8 vs. 2x4 models. The LAN module software reads its configura-
tion from the PDU microprocessor and automatically displays the proper format for the
application. See Figure 7.11.
