Installation and Operation Manual
ECN: 003155
Date: 06/4/2013
21
AC-SmartStart-7608-Series_IOM Rev 04
Windows Configuration & Control Utility
6.4 COMMUNICATION AND DISPLAY SETUP
The window shown in Figure 6.6 allows the user to configure the software so that it can
communicate with the PDU. Information that is entered on this screen will be associated
with the PDU when additional control and monitoring screen are displayed.
Before the software connection to the PDU can be made:
•
Select the PC COM port to use (1-16).
•
Select the PC COM port baud rate (4800,9600,19200,38400).
•
Select the PDU address in hexadecimal (00-FF).
•
Select the PDU model type (1x8, 2x4).
•
Select the optional temperature sensor. (If you ordered this option for your unit)
These settings can be loaded or saved to the local PC. When managing several PDU’s,
it can be beneficial to store each unit’s settings for later use.
Once the proper configuration is chosen, the user can click on the “Connect to PDU”
button in the lower left hand of the window.
Figure 6.6 Configure Communication Settings
