background image

1.3  QUICK SETUP

The following instructions are a quick start for setting up the 1788-R with a single Model 1788 or a
bank of Model 1788s. The Model 1788s should already be installed. If they are not installed, refer to the
Model 1788 User’s Guide.

To interface the 1788-R, it must first be connected to the power supply via a DB-25 connection. Use
either the supplied parallel cable or any standard parallel DB-25 cable. The maximum cable run for
guaranteed operation is ten feet. 

Using either the RS-232 or RS-422 DB-9 connectors on the 1788-R Power Supply (labeled “To Preamp”)
to connect the 1788-R to the Link In (RS-232/RS-422) on the first Model 1788 in the system using the
appropriate connection cable. 

Use a null modem cable when connecting via RS-232 and a standard

serial mouse/monitor extension cable when connecting via RS-422. 

Note:

On older Model 1788’s the DB-9 connectors are labeled Master RS-232 and RS-422. 

For long communication distance (> 100 feet, 33 meters) always use the RS-422 communication link.
For shorter distances choose between RS-232 and RS-422 based on availability of the proper communi-
cation cable.     

Place the 1788-R Power Supply either on the floor close by the remote or if the remote is mounted in a
rack the power supply can be physically attached to the back of the remote. Four screws are supplied
for that purpose. 

1788-R HOOKUP

Refer

to sections 3.0 for more details on interfacing the 1788-R into a system, particularly

a system running the proprietary, PC-based, 1788 Remote Program.

6

R E M O T E   C O N T R O L L E R

-

R

< < P

MODEL 1788 - 8 Channel Mic Pre

Aphex Systems    Sun Valley, CA

MIDI

IN

OUT

THRU

90-260 VAC 50/60 HZ 60 WATTS

Link In RS-232

WORD

CLOCK

OPTICAL

AUX

OUTPUT

˙˙

˙˙

˙˙

˙˙

˙˙

Ch 8

Ch 7

Ch 6

Ch 5

Ch 4

Ch 3

Ch 2

Ch 1

AES/EBU OUTPUT

TDIF-1

ADAT

IN

OUT

UTIL

1 2 3 4

ON

UTIL

1 2 3 4

ON

MIDI

IN

OUT

THRU

TO 1788-R CONTROLLER

RS-422

RS-232

RS-422

TO CONTROLLER

TO PREAMP

RS-232

TO POWER SUPPLY

Link In RS-422

Link Out RS-422

First Model 1788 in system chain

DB-25 Cable

1788-R Power Supply

1788-R Controller

Содержание 1788-R

















Отзывы: