APG DMS48, Руководство пользователя

Страница: 6 / 32

1 IMPORTANT SAFETY INSTRUCTIONS
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
11. Only use attachments / accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Service is required when the apparatus
has been damaged in any way, such as power-supply cord or plug damaged, liquid has
been spilled or objects have fallen into the apparatus, this apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
Safety Warnings
•
Permanent disconnection from the mains supply is to be achieved by
removing the supplied cord connector from the back of the unit.
•
Do not remove any covers, loosen any fixings or allow items to enter
any aperture.
•
Objects filled with liquids should not be placed on this apparatus.
• Replace the mains fuse only with a fuse of the same type
Installation instructions
1. This product must be earthed . Use only a flexible cable or cord provided with a green
or green and yellow core which must be connected to the protective earthing terminal
of a suitable mains plug or the earthing terminal of the installation. The cord must be
of maximum length 7.5 meters, rated SJ, SJT, or SJE, 10A minimum and be marked
VW-1.
2. Wiring to this product must only be made by suitably qualified personnel and must
comply with all local requirements.
3. Do not install this equipment in an enclosed space. Do not limit free ventilation and
movement of air around the back panel.
4. Only use attachments and accessories approved by or specified by the manufacturer.
For customers in Europe
This product complies with both the LVD (electrical safety) 73/23/EEC and EMC(electromagnetic
compatibility) 89/336/EEC directives issues by the commission of the European community.
Compliance with these directives implies conformity with the following European standards:
•
EN60065 Product safety
•
EN55103-1 EMC emissions
•
EN55103-2 EMC immunity
This product is intended for the following electromagnetic environments: E1, E2; E3 & E4.
User Manual DMS48 V1.1 6