APG DCR-1006A, Руководство оператора

Страница: 10 / 40

DCR-1006A Level Controller Rev. B2, 7/15
10
Automation Products Group, Inc.
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • sales@apgsensors.com
RST Module Wiring : connect the RS-485 NET
A and B terminals to the A and B terminals
of the RST module.
Vs
A (-)
B(+)
A1 (-) B1(+)
OUT
RST Module
RS-485
NET
RST-5000 series or RST-6001 Communication Module Wiring
The DCR-1006A can be connected to an RST-6001 RS-485-to-USB module for
interfacing with the APG Modbus Software, or to an RST-5000 series internet
communications module to provides remote access to the DCR’s readings and
settings. The RS-485 NET A and B terminals are the only connection required
for either RST module.
Sensor Wiring
The DCR-1006A is compatible with most DST, MNU, and MPX series sensors.
MNU/MPX Standard Cable Micro-Connector
24V Red Pin 1 (Brown)
GND Black Pin 3 (Blue)
A White Pin 2 (White)
B Green Pin 4 (Black)
DST Standard Cable Micro-Connector
+ Red Pin 1 (Brown)
- Black Pin 3 (Blue)
DST Sensor
DST
+
_
24V
GN
D
Vs
A (-)
B(+)
A1 (-)
B1(+)
OUT
MNU or MPX Sensor
RS-485
GND