6
Power Terminal
Pin 1
DC+ from power supply
Pin 2
DC- from power supply
Pin 3
Ground (not used)
Lane 1 and Lane 2 Terminal
Pin 1
Kitchen speaker positive
Pin 2
Kitchen speaker negative
Pin 3
Outside speaker
Pin 4
Outside speaker
Pin 5
Shield for digital signal
Pin 6
Positive digital signal for mic
Pin 7
Negative digital signal for mic
Pin 8
Signal from vehicle detector
Pin 9
Ground
Alerts Terminal
Pin 1
Alert 1
Pin 2
Alert 2
Pin 3
Alert 3
Pin 4
Alert 4
Pin 5
Alert 5
Pin 6
Ground
USB and RJ45 Terminal
USB
Used to update the system and upload messages
RJ45
Not used at this time
Troubleshooting
Problem
Possible Cause
Solution
Need help with the system settings.
Operations guide has been lost or misplaced and
adjustments need to be made.
Each system comes with a help guide located on the
settings tab of the system. This guide does not require
you to be logged into the system but will help with the
basic settings and operations of the base.
Cannot find a solution in the operations manual or
onboard system help guide.
If no solution can be found reach out to support at 800-
598-2370 for help and operations of the base.
Headset says "out of range."
(Blinking red light on mic boom).
Base has no power.
Verify that the power supply LED is lit up and that the
terminal block is fully seated into the terminal on the
base.
Содержание APXBASE
Страница 1: ...OPERATING MANUAL ...
Страница 10: ...9 ...
