Apel BR-5000N, Руководство по эксплуатации

Страница: 12 / 20

BR5N-1-OMA-103a 11
5. The sample No.(
SN.XXX SN.XXX SN.XXX SN.XXX
) shown on the LCD display is automatically
incre1) for the next measurement.
6. When the total measurement numbers reach 100, and one more measurement is
tried to be executed, the alarm buzzer sounds and
the LCD display shows “
* Memory Full * * Memory Full * * Memory Full * * Memory Full *
”
as shown right figure.
Press “SET” or “PRINT” to print out the whole data stored in the instrument.
If you want to skip the print, Press “EXIT”.
After the print or when the EXIT is pressed, LCD display
shows “Clear all data?” Press “SET” for clearning all data,
or press “EXIT” to skip the procedure.
* Any measurement can not be done unless stored cata are not cleared, when
*Memory Full*
is shown.
3.3.3 Print-out of measured data
The printer can be connected to BR-5000N and the measured data can be
printed out.
Connect the instrument and the printer with the printer cable, and turn on the
switch of the printer.
Turn on “PRINTER USE” of “SET 4” which is described in the section 3.5.2
“The setting of the printer”.
1. Auto print at each measurement.
Turn on the “Auto printer (SET 5)”. (Refer to 3.5.3)
2. Manual operation of printing right after the measurement.
Press “PRINT” after a data is measured.
3. Printing of whole data with designated ID_No.
Set the ID_No. and Press “EXIT” key then press
“PRINT” key.
4. Printing of the whole data.
When the memory area is fully stored, the whole stored data are printed.
Refer to 3.3.2 “Memory Full”
3.3.4 Data communication function
Display and collection of data on the Computer can be done through
the RS-232C cable from the instrument.
Turn on “COMM(RS-232C), SET 6” as described in the section 3.5.4,
if the communication is used.
Adjust the baud rate and the protocol to the computer.
Data format for output.
2
22
2 1
11
1,
, ,
, S
SS
S A
AA
A M
MM
M P
PP
P
–
0
00
0 0
00
0 5
55
5,
, ,
, 0
00
0 0
00
0 1
11
1 ,
, ,
, 2
22
2 1
11
1 .
..
. 3
33
3 0D 0A
ID_No. ID_Code, Name Sample No. Data CR LF
* Memory Full * Memory Full * Memory Full * Memory Full * * * *
Print all data ? Print all data ? Print all data ? Print all data ?
* Memory Full *
* Memory Full * * Memory Full *
* Memory Full *
Clear all data ?
Clear all data ? Clear all data ?
Clear all data ?
No.12 No.12 No.12 No.12 [Ready] [Ready] [Ready] [Ready]
[Print] No.12 [Print] No.12 [Print] No.12 [Print] No.12