Apeks NS158000, Руководство пользователя, Страница: 89 / 96

89
REFERENCE
Doc. 12-7969 Doc. 12-7969 r09 (9/22/22) © Apeks (2022)
CHANGING THE STRAPS
Your DSX is packaged with two different strap options, elastic or bungee straps.
Elastic Straps
Installation:
Step 1.Thread the strap
through the strap slot.
Step 2. Continue to
thread the strap through
the opposite strap slot.
Step 3. Thread the strap
through the buckle, as
shown.
Removal:
Simply, reverse the previous steps for removal.
Bungee Straps
Installation:
Removal:
The overhand knots will eventually take a set and be difficult to untie and remove; the bungees will likely need to
be cut off and replaced.
NOTES: There are many methods to attach the bungee cords. This method is simple and recommend-
ed because it allows for the redundancy of two straps, keeping you from losing a computer on a dive.
Step 1. Cut two equal
lengths of bungee.
Step 2. Tie an overhand
knot on one end the first
bungee.
Step 3. Thread the
bungee through one
of the bungee holes in
the DSX housing, as
shown.
Step 4. Repeat steps
1-3 on the other side
with the other strap.
Step 4. Thread the
other end of the
bungee through the
opposite hole, adjust
the length as needed,
and tie another retaining
overhand knot.
Step 5. Repeat steps
1-4 on with the other
piece of bungee, on the
other side of the DSX
housing.