Apeks NS158000, Руководство пользователя, Страница: 33 / 96

Doc. 12-7969 Doc. 12-7969 r09 (9/22/22)
33
© Apeks (2022)
CC SURFACE MODE
B. SET SP (SETPOINT)
This feature allows the user to set the setpoints (PO
2
) used for closed circuit rebreather dive
calculations and control auto setpoint switch settings. The DSX allows the user to set a low,
high, and a custom setpoint (unique to DSX). Custom setpoint can be programmed with a
higher PO
2
value than setpoint high, which may be used in the deco portion of the dive if the
diver chooses. The custom setpoint allows more dive flexibility without the need to adjust
the setpoint low or high values while underwater. Though the use of this feature is entirely up
to the user, and they may actually choose any PO
2
setting they wish for the custom setpoint
value, allowing for multiple dive scenarios. They may also set the feature to off if they prefer a
more traditional approach.
SET SP
1.30
0.70
1.00
150 FT
30 FT
ON
HIGH SP
LOW SP
CUSTOM SP
AUTO HIGH
AUTO LOW
OFF
OFF
/
/
CHOOSE A SETTING
SET SP
/
1.40
HIGH SP
/
SET SETPOINT
(HIGH, LOW, & CUSTOM SIMILAR)
PO
2
(partial pressure of oxygen)
NOTE: The Custom SP (Setpoint) can't be switched off while it is the active setpoint.
The Auto High setting assigns a depth to switch to the setpoint high during descent. While
Auto Low assigns the depth to switch to the low setpoint during ascent.
SET SP
/
ON
AUTO HIGH
/
ON/OFF
SET AUTO HIGH ON/OFF
(AUTO LOW IS SIMILAR)
SET SP
/
30 M
/
AUTO HIGH
switch depth
SET AUTO HIGH DEPTH
(AUTO LOW IS SIMILAR)
C. DIVE SETTINGS
This submenu allows you to control the DSX dive settings.
DIVE SETTINGS
CC
35-85
/
15 FT - 3 MIN
20 FT
DIVE MODE
BAILOUT PO2 LIMITS
CONSERVATISM
SAFETY STOP
LAST STOP DEPTH
/
DIVE SETTINGS
/
GAUGE SM
DIVE MODE
/
i. MODE
This screen allows you to access the CC (Closed Circuit), OC (Open Circuit), SM (Side-
mount), GAUGE SM (Sidemount), or Gauge Modes.
NOTE: Initiating a dive in Gauge SM (Sidemount) or Gauge Mode will block the
use of the other modes for 24 hours.