Apeks NS158000, Руководство пользователя, Страница: 38 / 96

Doc. 12-7969 Doc. 12-7969 r09 (9/22/22)
38
© Apeks (2022)
CC SURFACE MODE
E. DEVICE SETTINGS
Within the Device Settings menu you can customize the following seven operational func-
tions.
DEVICE SETTINGS
IMPERIAL
EN13319
5 SEC
OFF
STANDARD
TRANSMITTERS
UNITS
WATER TYPE
SAMPLE RATE
BLUETOOTH
RESET SETTINGS
WELCOME SCREEN
/ /
i. TRANSMITTERS
The DSX can use up to 6 transmitters (P/N NS119115) in Dive Mode to monitor
gas supplies. The Transmitters Menu allows for the programming of the wrist unit to
receive the signals from selected Apeks transmitters. See the Dive Mode Features
section (p. 21) for further information on transmitters.
You can scroll up or down to highlight a TMT (transmitter). When a transmitter is high-
lighted the DSX will scan for that transmitter's pressure and battery status. If the DSX
does not connect to the highlighted transmitter within 10 seconds, the message "NOT
AVAILABLE" will display.
Pressing the right button while a TMT number is highlighted will allow you to assign a
new serial number or modify an existing entry (use the last 6 digits of the serial num-
ber found on the transmitter).
TRANSMITTERS
TMT 1
TMT 2
TMT 3
TMT 4
TMT 5
TMT 6
/ /
ON
OFF
OFF
OFF
OFF
ON
BATT GOOD 198 BAR
SN: 123456
SN: 123456
SN: 123456
SN: 123456
SN: 123456
SN: 123456
NOTE: The serial number can be located on the
transmitter.
SERIAL #
TRANSMITTERS
/
SN: 12345
TMT 1
/
SET SERIAL NUMBER SELECT A TRANSMITTER ASSIGNMENT
TRANSMITTERS
/
SET
TMT 1
/
CHOOSE AN OPTION
ON, OFF, SET