Apeks NS158000, Руководство пользователя, Страница: 39 / 96

Doc. 12-7969 Doc. 12-7969 r09 (9/22/22)
39
© Apeks (2022)
CC SURFACE MODE
ii. UNITS
The Units feature allows you to select whether Metric (M, BAR) or Imperial (FT, PSI)
units of measure will be displayed.
!
WARNING: All depth related settings and alarms shall be reset after changing
the units from imperial to metric or metric to imperial.
DEVICE SETTINGS
/
IMPERIAL
UNITS
/
iii. Water Type
The Water Type feature allows you to set SALT, FRESH, or EN13319 (a European CE
standard for dive computers) water environment for accurate depth calculations.
DEVICE SETTINGS
/
EN13319
WATER TYPE
/
iv. SAMPLE RATE
The Sample Rate controls how frequently the DSX stores a data snapshot for D
Download during a dive. Setting options are 2, 15, 30, or 60 second intervals. Shorter
intervals will provide a more precise record of your dives.
NOTE: New data will automatically overwrite the oldest data in memory when
the memory becomes full. The DSX Log and Di Download data is stored
separately in different partitions of the memory. The Log only stores a short
summary of each dive. Alternately, the Di Download function stores
much larger files for each dive. Depending on the chosen settings and dive
durations, it is possible to see dives stored in the DSX's onboard Log that have
already been overwritten in the Di Download Partition. Choosing a
longer Sample Rate interval will consume less memory per dive. Remember to
download your dives more frequently if you are using a shorter Sample Rate
interval.
DEVICE SETTINGS
/
5 SEC
SAMPLE RATE
/
DIVE & GAUGE MODE
DOWNLOAD MEMORY
CAPACITY
SAMPLE
RATE
(seconds)
MAXIMUM
HOURS
2 218
15 1638
30 3276
60 6553