Chapter 7: AP-5004 Moible DVR 3G / GPS configuration
109
7.5 Important notes when using 3G connection
1. Username & Password blank are supported.
2. Make sure that this 3G provider will give you a public IP with port 80, 4128 are unblocked.
3. Disable the PIN of the Sim card, if it has the PIN blocking enabled. You can do this with the
dialing software (for Windows XP) inside the 3G USB Stick.
4. The 3G connection will disconnect the LAN connection.
5. The "LAN" status will become gray as
Fig. 7-9
, if the 3G connection is successful.
7.6 How to configure GPS
AP-5004 will search for USB GPS modem ONLY when power on start up. Please make sure to
insert GPS modem on USB port
before power on AP-5004.
After AP-5004 boot up into ready, go to “System setup”->”serial port”.
and select the correct USB device (normally it is USB1,if not, please try each one of them).It must be
"USBx", where x is a number.
The setting of other fields are :
7.6.1
Change "
Device
" to "
Data Capture".
7.6.2
Change
"Speed"
to
"4800".
7.6.3
Change
"Model"
to
"GPS"
.
7.6.4
Change
"Show GPS"
to
"Yes"
Fig. 7-9
Fig. 7-10
Fig. 7-11
Содержание AP-5004
Страница 99: ...Chapter 5 APEC Network Operation 99 Fig 5 44...