APE 100 WICK Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 65

background image

I-2

OPERATING

INSTRUCTIONS

MODEL 100

BOTTOM DRIVE

WICK INSERTER

I. GENERAL DESCRIPTION

B. VIBRATION GEAR BOX

The vibration gear box contains two eccentric weights which rotate in a vertical plane to
create vibration (Dynamic Force). The eccentric weights are driven by a hydraulic motor.

C. VIBRATION SUPPRESSOR

The vibration suppressor contains 8 rubber elastomers to isolate the vibration case from
the leads. The mandrel insert / extract motors are mounted here. A pair of hydraulic motors
with a sprocket assembly mounted to the motors force the mandrel into the ground as well
as removing the mandrel from the ground. There is a roller assembly that works together
with the sprockets keeping the mandrel engaged with the sprockets.

D. WICK CARRIER

The wick carrier assembly is designed to carry six spools of wick drain. This assembly has
capability to hold one spool on the center of the wick tube and fi ve to the side of center
of the wick tube. While you line-up the fi rst spool of wick to the wick tube the rest of the
carrier can hold the spare spools of wick. When the center spool is close to being empty
mechanically join the end of the wick to the beginning of a new spool of wick. When the
center spool is empty, remove spool bracket and wick roll tube. Re-install spool bracket,
slide the wick spools so that the fi rst spool is in-line with the wick tube and slide the other
spool bracket over to keep the remaining wick spools in place. Continue to mechanically
joining the end of a spool to the beginning of the next spool and adjusting the spool bracket.

E. MANDREL GUIDE

The mandrel guide is a set of rollers at the bottom of the vibration case used to maintain
position of the mandrel fore and aft as well as right and left. The mandrel is a rectangular
steel tube that is used to thread the wick drain into the soil.

F. LEGS

The legs are to rest upon the ground to stabilize the wick inserter while inserting wick or
removing the mandrel. They are adjustable to suit the job site and operators preference of
height for best visibility.

G. LEADER SYSTEM

The leader system is a lattice system used to support and guide the mandrel and wick drain.
This system has a trough for the mandrel to run in maintaining it’s location in relationship
to the wick inserter assembly. A set of lugs and pins connect the leader system together as
well as the leader system to the inserter assembly. On top of the leader system is a wick
guide bracket that aligns the wick drain that goes to the top of the leader system and over
to top of the mandrel.

«
...
8
9
10
11
12
...
»

Содержание 100 WICK


































































Отзывы:

Нет отзывов

Похожие инструкции для 100 WICK

AJSPD850P - P2 DECK

Бренд: Panasonic Страницы: 73

DVCPRO P2 Series

Бренд: Panasonic Страницы: 32

Бренд: Wavetek Страницы: 74

Бренд: Fairchild Страницы: 16

Бренд: JB-Lighting Страницы: 40

ST70 Instrument

Бренд: Raymarine Страницы: 12

Бренд: Raven Страницы: 73

Бренд: Tascam Страницы: 3

Бренд: RAB Lighting Страницы: 4

Бренд: campgo Страницы: 33

Бренд: Vahle Страницы: 36

Бренд: Vahle Страницы: 20

Бренд: Vacon Страницы: 102

Бренд: LSI Страницы: 24

Бренд: Wang Страницы: 146

Бренд: VaBroom Страницы: 4

Бренд: Vibration Research Corporation Страницы: 333

Бренд: Feniex Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды