APB-DynaSonics MixSwitch-C, Руководство пользователя

Страница: 5 / 9

Main Inputs: Rear Panel Connectors
There are two sets of 4 input jacks: Inputs A1 through A4 and Inputs B1 through B4.
The jacks are Latching, 3-Pin Female XLR.
Pin-2 is in-polarity, Pin-3 is out-of-polarity, Pin-1 is connected directly to the chassis metalwork.
Electronically Balanced.
Maximum Input Level: +24dBu
Input Impedance: >20KΩ (Differential)
Inputs are labeled 1 through 4, but 1 also indicates (L), and 2 also indicates (R ). This L-R labeling is for convenience
only, these signals can come from any source.
Main Outputs: Rear Panel Connectors
There is one set of 4 output jacks: Outputs 1-4
The jacks are Latching, 3-Pin Male XLR.
Pin-2 , Pin-3 driven -, Pin-1 is connected directly to the chassis metalwork.
Electronically Balanced Output.
Maximum Output Level: +28dBu into 600 Ω or higher
Output Impedance: 50Ω
Outputs are labeled 1 through 4, but 1 also indicates (L), and 2 also indicates (R ). This L-R labeling is for
convenience only, these signals can go to any destination.