APB-DynaSonics MixSwitch-C, Руководство пользователя

Страница: 6 / 9

Remote Connectors (DSub-9 Input and Output)
:
The DSub-9 connectors allow the MixSwitch or MixSwitch-C Master to control any added MixSwitch-C unit to act
as an expander. Units are fitted with In & Out DSub-9 connectors (Male & Female) to allow this control function to
daisy- chain to additional units when connected.
DSub-9 connections: MixSwitch and MixSwitch-C DSub-9 Connector Pin# Function (Some pins shown below are not
currently used on MixSwitch-C, but all wiring between Male and Female connectors should be connected):
1: 0-Volts (Internally tied to Chassis with 10Ω resistor)
2: Solo Audio – (Balanced signal for Listen Audio)
3: Solo DC Control
4: Select A (Tied to 0-Volts when active)
5: Mute Command (Tied to 0-Volts when active)
6: Solo Audio + (Balanced signal for Listen Audio)
7: 0-Volts (Internally tied to Chassis with 10Ω resistor)
8: Power OK (Tied to 0-Volts when active)
9: Select B (Tied to 0-Volts when active)