35
Buttons and touch
sounds
Disabled
no sound indicating selection of elements of the screen and of
hardware buttons
Enabled
Enabled
the sound indicating selection of elements of the screen and of
hardware buttons is active
F button function
(chapter 10)
Device status
- the status screen (accessible also using he buttons
[F]
+
[ESC]
)
Device status
Stop/Start of recording
- change of the
Type of recording
parameter to
Off
or
Continuous
(chapter 12.5), after the power supply is switched on, the recording is
always on (continuous)
Copy archives to the USB memory
(operation accessible also in the
Memory
options menu
, chapter 12.6)
Move the archives to the USB memory
- the files in the controller are deleted after
they have been copied
Disable/Enable sound alarm
- change of the
Alarm sound signal
parameter to
Disabled
or
Enabled
(chapter 12.4.1,
Control and alarm options
menu ->
Output
...); after the power supply is switched on, the sound signalling of active
alarms is always switched on
Start/Stop of control for all outputs
- after the power supply is switched on, the
control status is exactly the same as at the time of switching off the power supply
(no change), (chapter 12.6)
Touch panel lock
– touch screen and keypad lock (except for
[F]
)
BIN5 input function
(2)
None
- the BIN5 function input is not used
None
Start/stop of control for all outputs
- has a higher priority than the
[F]
button
Notes:
(1)
- password protection of remote access applies to a configuration with the ARSOFT-CFG-WZ1 software (for
parameter configuration) and the ARSOFT-LOG-WZ3 software (for downloading files with measurements
over the Ethernet interface)
(2)
– the parameter is not available in the version of the controller without the optional mA/V outputs and BIN
inputs module
12.10. DATE AND TIME
The current time and date are displayed in the status bar (chapter 11.1) in all measurement data presentation
modes and are used as time stamps for recording.
In order to supply the internal clock (RTC) when the power supply is cut off, the device is fitted with a CR1220
lithium battery that suffices for at least 5 years of continuous operation.
Table 12.10. Configuration parameters in the
Time and date
menu
Parameter
Range of variability of the parameter
Date
(yyyy-mm-dd)
2008-06-01
÷
2099-12-31
Time
(hh:mm:ss)
00:00:00
÷
23:59:59
