12
Name
Software description
ARSOFT-CFG
(free)
- display of current measurement data from the connected device
- configuration of the type of measurement input, the indication range, the alarm options,
the display, etc.
- creation of a disk with a "cfg" extension, containing the current configuration
of the parameters to be used again (duplication of configuration)
- the software requires communication with the device via the
PR
port (AR956 or AR955)
The detailed descriptions of the aforementioned applications can be found in the installation folders.
NOTE:
Before a connection is established, make sure that the MODBUS address and the transmission speed in the options
of the ARSOFT-CFG software are the same as the settings of the device. Moreover, in the ARSOFT software options,
set the number of the COM serial port in use (in the case of the RS956 or AR955 programmer it is the number
assigned by the operating system during installation of the drivers).
16. USER'S NOTES
!
