APA 20998, Руководство пользователя

Страница: 10 / 28

10
6.2.2 Mounting the polishing hood
6.3 Polishing
Make sure that the plug has been removed from the socket before you attach or remove a polishing hood.
Unintentional activation of the device may result in injuries or damages to the device or vehicle.
Loose, rotating parts may catch your fingers or, for example, get caught in door
Only use clean and undamaged polishing hoods and plates. Contamination or cracks may damage the
paintwork.
Attach the polishing hood to the polishing plate (Position 9 in the overview). Make sure that the polishing plate
and hood are free from dirt.
Align the polishing hood centrally on the polishing plate. Hide or shorten the fixing cords.
Carefully clean the surface you wish to polish. The surface must be completely dry before polishing. Only
use polishing and waxing products designed for use with polishing machines. Observe the instructions
for the care products being used. Heavily weathered paintwork may require special pre-treatment. For
information, inquire at the specialist dealership.
Applying excess care product will not improve the results; it will just make it more difficult to remove.
6.3.1 Applying the polishing medium to the polishing hood
Apply the care product evenly up to the edges of the polishing hood. A continuous, thin coating must be ensured.
6.2.2 Installing the handle
Make sure that the plug has been removed from the power socket. Fit the
handle onto the gear housing and insert the Allen screws into the threaded
holes (Position 6 in the overview), Figure 4. Align the handle correctly and
then tighten the screws.
Figure 4: Installation of handle
Element 1.pdf 1 25.01.19 10:55
Element 1.pdf 1 25.01.19 10:55
Polishing too long on the same spot may damage the varnish.
Do not polish the vehicle in full sunlight or in very high temperatures.
Element 1.pdf 1 25.01.19 10:55
Apply the product only to painted surfaces, never to plastic parts or rubber seals. Using the polishing hood, dab the
care product onto various spots on the surface to be polished. Set the revolutions using the setting wheel (Position
1 in the overview) to the lowest level. Hold the device firmly with both hands. Rest the device with polishing hood
on the surface to be processed. Switch the device on using the ON/OFF switch (Position 4 in the overview). To make
work easier, there is a locking button on the side of the handle (Position 5 in the overview). If this is pressed during
operation, the ON/OFF switch no longer needs to be operated; the polishing machine will remain switched on.
6.3.2 Applying the polishing medium to the paintwork