AOR AR8000, Руководство по эксплуатации

Страница: 96 / 115

AR8000 operating manual
96
The top line of the LCD will display “MEMO-DATA” the second line will display
“DELETE” and the fourth line will display “BANK SET” to ensure that you are
aware of exactly the sub menu selected so that accidental memory bank
deletion is not possible.
The cursor will be positioned over the memory bank identifier (LETTER) to the
right of the legend “BANK”. Use the [DIAL] or keypad to select memory
channel “J” which is to be deleted.
Press [ENT] to delete the entire contents of memory bank “J”, the receiver will
return to 2VFO mode.
Deleting selected channels of memory bank “J”before AUTO STORE
Although it is advised that ALL memory channels of bank “J” are deleted before
starting AUTO STORE, it is not absolutely essential. As long as some empty
channels are available then auto store will operate.
To delete a few selected channels only, first place the AR8000 into “M.RE”
mode by switching on the receiver and pressing the [SCAN] key once (unless it
is in SCAN mode in which case you should press [2VFO] followed by [SCAN]).
Select the memory channel which you wish to delete by rotating the [DIAL].
The numeric keypad may be used to change the memory bank (identifier A, B,
C etc). The UP / DOWN keys may also be used to select the memory channel.
Alternatively you may enter the memory channel in full via the numeric keypad.
For instance, to recall memory channel “J31” press [0J] [3] [1] [ENT].
Once recalled, to delete the memory data from memory channel “J31” press
[FUNC] [9].
The memory channel will be deleted and the display will move upward or
downward (depending upon whether the [UP] or [DOWN] keys had been
previously used or direction of rotation of the [DIAL]) to the next memory
channel number which contains data.
Starting AUTO STORE
Place the receiver into program search mode by pressing [SRCH]. Select any
search bank containing data and allow the set to search and find “active”
channels.
Memory channels of bank “J” will be automatically written to.
Reviewing automatically stored memory channels
You may review the frequencies which have been written automatically to
memory by entering MEMORY RECALL MODE.