AOR AR8000 Скачать руководство пользователя страница 82 | Manualshive

Страница: 82 / 115

background image

AR8000 operating manual

82

The legend “BANK” is displayed on the left of the third line with a memory
location to the right. Either key in the desired memory location for storage via
the keypad or use the [DIAL] (the UP/DOWN keys change the cursor position
if you make a mistake).

Press [ENT] to accept the chosen memory location.
The cursor moves to the fourth line where a
maximum seven character comment may be added.
Use the [DIAL] and UP/DOWN keys to change the
text comment as desired then press [ENT] to accept
the complete entry. (If you do not wish to make a
comment just press [ENT] to skip the entry and
accept the complete data).

The display returns to VFO mode with the same frequency displayed and does
not continue to search. To resume program search from the same frequency
press [SRCH]. If the active frequency prevents the search process from
continuing, press the UP/DOWN keys to force the process onward.

PASS frequencies in program search mode
Should you encounter a permanently active frequency while in program search,
press [PASS] to lock out the frequency and force search to continue. The
frequency will be “skipped” when the bank is next searched. Refer to section
14 of this manual for further information regarding SEARCH PASS.

13-4 Programming and reprogramming PROGRAM SEARCH BANKS

You may wish to specify your own frequency limits or modes for program
search banks, you may also reprogram any which may be already prepro-
grammed. There are 20 program search banks in total A, B, C, D, E, F, G, H,
I, J and protected banks a, b, c, d, e, f, g, h, i, j (the later ten only being
accessible if the password code had been keyed in or the password facility not
activated).

Example of reprogramming a search bank - “J”
Let’s assume that you wish to reprogram the data contents of search bank “J”:
433.000 to 433.6000 MHz, mode to NFM, 25 kHz steps with STEP OFFSET
OFF, attenuator OFF and comment to 70CM.

To make things easier for this example, first delete the existing data.

Press [SRCH] to enter SEARCH mode. While in search mode press [FUNC]
[9] to access the “SRCH-DATA DELETE” menu. The highlight cursor will be
flashing over a search bank identifying letter. Select program search bank “J”
by pressing [0J] or use the UP/DOWN keys or rotate the [DIAL]. When “J” is
displayed press [ENT] to delete the data contents. The display will return to
SEARCH mode.

«
...
80
81
82
83
84
...
»

Содержание AR8000




















































































































Отзывы:

Нет отзывов

Похожие инструкции для AR8000

Бренд: Harman Kardon Страницы: 20

Бренд: Harman Kardon Страницы: 20

Бренд: Harman Kardon Страницы: 2

Бренд: Harman Kardon Страницы: 146

Бренд: Harman Kardon Страницы: 2

Бренд: Harman Kardon Страницы: 64

Бренд: Harman Kardon Страницы: 4

Бренд: Harman Kardon Страницы: 187

Бренд: Harman Kardon Страницы: 187

Бренд: Harman Kardon Страницы: 10

Бренд: Harman Kardon Страницы: 2

Бренд: Harman Kardon Страницы: 48

The Counterpoint A-400

Бренд: Harman Kardon Страницы: 5

Бренд: Harman Kardon Страницы: 24

Бренд: Naxa Страницы: 8

Бренд: Datawell BV Страницы: 49

Бренд: Sencore Страницы: 25

SoundPlus Infrared Receiver WIR RX12-4

Бренд: Williams Sound Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды