AOR AR8000 Скачать руководство пользователя страница 92 | Manualshive

Страница: 92 / 115

background image

AR8000 operating manual

92

14-2 FREQUENCY PASS (lockout) using the “FREQ PASS” edit menu

New frequencies may be manually added to the frequency pass list and
existing frequencies edited or deleted.

The “FREQ PASS” menu is accessed while in SEARCH mode using the
sequence [FUNC] [PASS].

The “FREQ PASS” menu displays the legend “FREQ
PASS” on the top line to confirm operation.

The second line of the LCD will display the legend
“BANK” followed by the search bank identifier to the
right. The highlight cursor will be flashing over a
search bank identifying letter (the current search bank
parameters will be displayed on the fourth line of the
LCD in a scrolling format, if there is no data
programmed the data areas will display “- - -”).

Select the search bank identifying letter for the bank you have chosen (if you
are searching bank “B” then select “B” now). This may be selected using the
[DIAL], keypad or UP/DOWN keys. When the required bank identifier is
displayed (“B”) press [ENT] to select the bank for editing.

The left side of the second line of the LCD displays “BANK B00” or the first
pass channel in the selected bank. The fifty pass channels are numbered 00
to 99.

The highlight cursor flashing on the first letter “P” (for PASS) to the left of the
third line of the LCD. To review the contents of the PASS list rotate the DIAL.
The pass channel number will be displayed on the second line of the LCD.

14-3 Deleting (cancelling) a single PASS frequency

It is possible to delete a frequency from the pass list so that it will be searched
again (no longer passed / skipped / locked out).

To delete a frequency select the corresponding pass channel location (as
described in section 14-2 - in search mode [FUNC] [SRCH] select letter [ENT]
rotate [DIAL] to select frequency) so that the frequency is displayed to the right
of the letter “P”.

Key in a new frequency of null value [0] using the keypad (the entry of [0] will
delete the chosen pass channel) then press [ENT].

The data in the pass list will “shuffle” down to fill the empty channel and a
vacant channel will appear at the top of the list.

«
...
90
91
92
93
94
...
»

Содержание AR8000




















































































































Отзывы:

Нет отзывов

Похожие инструкции для AR8000

Бренд: PAG Страницы: 2

Бренд: Caliber Страницы: 23

MultiView II DVI-Rx-1K

Бренд: Magenta Страницы: 33

MultiView II AK600

Бренд: Magenta Страницы: 28

Бренд: Sennheiser Страницы: 2

Бренд: Icom Страницы: 36

Бренд: Milennia Страницы: 8

Бренд: Sangean Страницы: 12

LBT-PAR02 Series

Бренд: Elecom Страницы: 2

Бренд: steute Страницы: 28

Бренд: Delta Страницы: 66

Бренд: Ferguson Страницы: 42

Lanzar Vibe VBD2600MP

Бренд: Lanzar Страницы: 23

Бренд: Goodmans Страницы: 20

CS1200VD - PART 1

Бренд: THOMSON Страницы: 9

Бренд: Tokai Страницы: 11

Бренд: Xantech Страницы: 2

Бренд: Denver Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды